For Leuze RKU318 Series PBT Ultrasonic distance Sensors Replacement | Sensing Range 0 m to 0.4 m
- Model
- HTU430B Series | RKU318-400.3/2X-M12, RKU318-400.3/4X-M12
Item specifics
- Series:
- RKU318 Series
- Size:
- M18
- Sensing Distance:
- 0 m - 0.4 m
- Output Method:
- PNP NO, NPN NO
- Connection Type:
- M12
- Security level:
- IP67
- Material:
- PBT
Review
Description
For Leuze RKU318 Series Nickel plated brass Ultrasonic distance Sensors Replacement | Sensing Range 0 m to 0.4 m Parameter
Brand | From network | DADISICK |
|
RKU318-400.3/2X-M12 | CSB18-500-JA45-E2-V15 | ||
RKU318-400.3/4X-M12 | CSB18-500-JA45-E3-V15 | ||
Thread Size | M18 | M18 | |
Sensing Distance | 0 m - 0.4 m | 50 mm - 500 mm | |
Output Method | PNP NO NPN NO | Single NPN / PNP switch output | |
Connector | M12 | M12 | |
Security level | IP67 | IP67 | |
Material | PBT | Copper nickel plating | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand Leuze's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
1. How can ultrasonic sensors be protected from interference?
Ultrasonic sensors employ a specific frequency of ultrasound and internal algorithms to filter out noise and interference, thereby enhancing the reliability and accuracy of the measurement.
2. What precautions should be taken when using ultrasonic sensors in outdoor environments?
When used outdoors, it is important to consider the ambient temperature, humidity, and wind speed in order to ensure optimal sensor performance. The selection of waterproof and dustproof designs for ultrasonic sensors can enhance their reliability in harsh environments.
3. Please describe the installation requirements for ultrasonic sensors.
Ultrasonic sensors should be installed in a location that avoids obstructions and reflective surfaces, keeps the transmitting and receiving areas of the sensor clean, and follows the manufacturer's installation guidelines to ensure optimal performance.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
