For Turck RU100 Series M18 Ultrasonic Distance Sensors Replacement | Sensing Range 15 cm to 100 cm
- Model
- RU100 Series | RU100U-M18MS-AP8X2-H1151, RU100U-M18M-AP8X2-H1151, RU100U-M18M-UP8X2-H1151, RU100U-M18M-LFX-H1151, RU100U-EMT18E-LU8X2-H1151, RU100U-EMT18M-UP8X2-H1151, RU100U-EMT18E-LI8X2-H1151, RU100U-EMT18M-AP8X2-H1151
Item specifics
- Series:
- RU100 Series
- Size:
- M18
- Sensing Distance:
- 15 cm - 100 cm
- Output Method:
- IO-Link，PNP NO/NC, 240…1600 Hz (60…400 Hz),
- Connection Type:
- M12
- Security level:
- IP67
- Material:
- Nickel plated brass
Review
Description
For Turck RU100 Series M18 Ultrasonic Distance Sensors Replacement | Sensing Range 15 cm to 100 cm Parameter
Brand | From network | DADISICK |
|||
Models | RU100U-M18MS-AP8X2-H1151 | CSB18-1000-J55-E3-V15 | |||
CSB18-1000-J55-E5-V15 | |||||
RU100U-M18M-AP8X2-H1151 | CSB18-1000-J55-E3-V15 | ||||
CSB18-1000-J55-E5-V15 | |||||
RU100U-M18M-UP8X2-H1151 | CSB18-1000-J55-E3-V15 | ||||
CSB18-1000-J55-E5-V15 | |||||
RU100U-M18M-LFX-H1151 | CSB18-1000-J55-IUEP-IO-V15 | ||||
RU100U-EMT18E-LU8X2-H1151 | CSB18-1000-J55-IUEP-IO-V15 | ||||
RU100U-EMT18M-UP8X2-H1151 | CSB18-1000-J55-E3-V15 | ||||
CSB18-1000-J55-E5-V15 | |||||
RU100U-EMT18E-LI8X2-H1151 | CSB18-1000-J55-IUEP-IO-V15 | ||||
RU100U-EMT18M-AP8X2-H1151 | CSB18-1000-J55-2EP-IO-V15 | ||||
Thread Size | M18 | M18 | |||
Sensing Distance | 15 cm - 100 cm | 60 mm - 1000 mm | |||
Output Method | IO-Link，PNP NO/NC Frequency output 240…1600 Hz (60…400 Hz) analog 0-10V analog output 4... 20mA | PNP NO/NC analog 0-10V analog output 4... 20mA | |||
Connector | M12 | M12 | |||
Security level | IP67 | IP67 | |||
Material | Nickel plated brass | Nickel plated copper | |||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our ultrasonic distance sensors is a safety part made by DADISICK, not official brand Turck's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
Model:
CSB18-1000-J55-E3-V15, CSB18-1000-J55-E5-V15, CSB18-1000-J55-IUEP-IO-V15, CSB18-1000-J55-2EP-IO-V15
FAQ
Please describe the installation requirements for ultrasonic sensors.
A: Ultrasonic sensors should be installed in a location that avoids obstructions and reflective surfaces, keeps the transmitting and receiving areas of the sensor clean, and follows the manufacturer's installation guidelines to ensure optimal performance.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
