For PEPPERL+FUCHS UC-30GM Series Diffuse Mode Ultrasonic Sensors Replacement | Sensing Range 200 mm to 4000 mm and 350 mm to 6000 mm
- Model
- UC-30GM Series | UC4000-30GM-E6R2-V15, UC4000-30GM-E7R2-V15, UC4000-30GM-IUR2-V15, UC6000-30GM-E6R2-V15, UC6000-30GM-E7R2-V15, UC6000-30GM-IUR2-V15
Item specifics
- Series:
- UC-30GM Series
- Size:
- M30
- Sensing Distance:
- 200...4000 mm / 350...6000 mm
- Output Method:
- PNP / NPN / Analog output
- Connection Type:
- M12
- Security level:
- IP67
- Material:
- Nickel plated brass
Review
Description
For PEPPERL+FUCHS UC-30GM Series Diffuse Mode Ultrasonic Sensors Replacement Parameter
Brand | From network | DADISICK |
|
Models | UC4000-30GM-E6R2-V15 | CSB30-4000-J60-E6-V15 | |
UC4000-30GM-E7R2-V15 | CSB30-4000-J60-E7-V15 | ||
UC4000-30GM-IUR2-V15 | CSB30-4000-J60-IU-V15 | ||
UC6000-30GM-E6R2-V15 | CSB30-6000-J70-E6-V15 | ||
UC6000-30GM-E7R2-V15 | CSB30-6000-J70-E7-V15 | ||
UC6000-30GM-IUR2-V15 | CSB30-6000-J70-IU-V15 | ||
Thread Size | M30 | M30 | |
Sensing Distance | 200...4000 mm / 350...6000 mm | 200 mm - 4000 mm / 350 mm - 6000 mm | |
Output Method | 2*PNP NO/NC 2*NPN NO/NC Analog voltage output 0-10 V
Analog current output 4-20 mA | 2*PNP NO/NC 2*NPN NO/NC Analog voltage output 0-10 V
Analog current output 4-20 mA | |
Connector | M12 | M12 | |
Security level | IP67 | IP67 | |
Material | Nickel plated brass | Nickel plated copper | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety light curtain is a safety part made by DADISICK, not official brand PEPPERL+FUCHS's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
Model:
CSB30-4000-J60-E6-V15, CSB30-4000-J60-E7-V15,
CSB30-4000-J60-IU-V15, CSB30-6000-J70-E6-V15,
CSB30-6000-J70-E7-V15, CSB30-6000-J70-IU-V15
FAQ
Please describe the installation requirements for ultrasonic sensors.
A: Ultrasonic sensors should be installed in a location that avoids obstructions and reflective surfaces, keeps the transmitting and receiving areas of the sensor clean, and follows the manufacturer's installation guidelines to ensure optimal performance.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
