For Omron D4GS-N Series 2 or 3 Contacts Tongue Interlock Switches Replacement | Operation Keys Vertical Mounting
- Model
- D4GS-N Series | D4GS-N1T, D4GS-N1T-3, D4GS-N1T-5, D4GS-N2T, D4GS-N2T-3, D4GS-N2T-5, D4GS-N3T, D4GS-N3T-3, D4GS-N3T-5, D4GS-N4T, D4GS-N4T-3, D4GS-N4T-5
Item specifics
- Series:
- D4GS-N Series
- Locking principle:
- Operation Key
- Number of contacts:
- 2 or 3
- Direct Opening Force:
- ≥ 60 N
- Material:
- —
- Connection:
- 1 m or 3 m or 5 m Cable
- Security level:
- IP67
- Certifications:
- TÜV, CE, UL, S mark, CCC
Review
Description
For Omron D4GS-N Series 2 or 3 Contacts Tongue Interlock Switches Replacement Parameter
Brand | From network | DADISICK |
|
Models | D4GS-N1T |
OX-D2/OX-D3 series | |
D4GS-N1T-3 | |||
D4GS-N1T-5 | |||
D4GS-N2T | |||
D4GS-N2T-3 | |||
D4GS-N2T-5 | |||
D4GS-N3T | |||
D4GS-N3T-3 | |||
D4GS-N3T-5 | |||
D4GS-N4T | |||
D4GS-N4T-3 | |||
D4GS-N4T-5 | |||
Technical parameters | Sensor principle | Electro-mechanical | Electro-mechanical |
Locking principle | Operation Key | Operation Key | |
Number of contacts | 2 or 3 | 2 or 3 | |
Direct Opening Force | ≥ 60 N | ≥ 60 N | |
Approach speed | 0.1 to 0.5 m/s | 0.05 - 0.5 m/s | |
Actuation frequency | 30 operations/minute max. | Up to 20 operations/min | |
Material | — | Resin, PA66 flame retardant | |
Connector | 1 m or 3 m or 5 m Cable | M20 | |
Power consumption | — | — | |
Rated insulation voltage (Ui) | 250 V | 400 V | |
Rated operating current (voltage) | AC-15: 0.75 A/240 VAC
DC-13: 0.27 A/250 VDC | AC-15: 2 A / AC 400 V | |
Rated impulse withstand voltage (Uimp) | 2.5 kV, 4 kV, 6 kV | 4 kV | |
Enclosure rating | IP67 | IP67 | |
Ambient operating temperature | -30 to 70℃ | -20℃ to 60℃ | |
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | |||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety switch is a safety part made by DADISICK, not official brand Omron's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
FAQ
How do Safety Interlock Switches work?
Safety interlock switches are usually used in conjunction with doors or guards. When the door or guard is not closed or is in an open state, the switch will cut off the circuit, preventing the equipment from starting or running. Once the door or guard is closed, the switch restores the circuit, allowing the equipment to operate normally.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
