For Omron SGE Series Safety Edges Replacement | SGE-365
- Model
- SGE Series | SGE-365
Item specifics
- Series:
- SGE Series
- Sensor length:
- 150 mm to 6100 mm
- Actuation distance:
- 5.2 mm
- Actuation force:
- 78 N
- Response time:
- ＜ 13 ms
- Cross-sectional area:
- 35 mm × 80 mm (including base)
- Material:
- EPDM
- Degree of protection:
- IP65
- Certifications:
- TÜV, CE
Review
Description
For Omron SGE Series Safety Edges Replacement Parameter
Brand | From network | DADISICK |
||
Models | SGE-365 |
DB-PSE-360 | ||
Detection method | Resistive | Pressure-sensitive | ||
Sensor length | 150 mm to 6100 mm | 200 mm to 6000 mm | ||
Actuation distance | 5.2 mm | ＜ 5 mm | ||
Actuation force | 78 N | ≤ 100 N | ||
Overtravel distance | 33.8 mm (400 N) | ＜ 45 mm | ||
Response time | ＜ 13 ms | 13 ms | ||
Cross-sectional area | Width: 35 mm, Height: 80 mm (including base) | Width: 35 mm, Height: 60 mm (base not included, base height: 14 mm) | ||
Maximum operation angle | 2 × 45° | ＜ 90° | ||
Material | EPDM | EPDM | ||
Degree of protection | IP65 | IP65 | ||
Connection | 1/5/10 meters PUR Ø 4 mm 2 × 0.34 mm² | 2 meters VVR Ø 4 mm 2 × 0.35 mm² (Red/black core) | ||
Certifications | TÜV, CE | TÜV | ||
Mechanical life | 1,000,000 cycles min. | ＞ 3,000,000 times | ||
Ambient operating temperature | -10°C to 55°C | -20℃ to 55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety edges is a safety part made by DADISICK, not official brand Omron's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DB-PSE series safety edges
DB-PSE Series Satety Edges Dimensions
DB-PSE Series Satety Edges Cross-sectional area
DB-PSE Series Satety Edges's Base dimensions
FAQ
How do Safety Edges work?
Safety edges work by detecting pressure when an object or person comes into contact with the edge. The pressure signal is then transmitted to a control unit, which triggers the appropriate safety response, such as stopping or reversing the movement of the machinery or door.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
