For ABB TT-Series Safety Edges Replacement | TT 25-30 TPE
- Model
- TT-Series | TT 25-30 TPE
Item specifics
- Series:
- TT-Series
- Sensor length:
- Custom (Max Delivery length 25 m)
- Actuation distance:
- 5.3 mm
- Actuation force:
- 63.4 N
- Response time:
- —
- Cross-sectional area:
- 25 mm × 30 mm
- Material:
- TPE
- Degree of protection:
- IP65
- Certifications:
- TÜV, cURus
Review
Description
For ABB TT-Series Safety Edges Replacement Parameter
Brand | From network | DADISICK |
||
Models | TT 25-30 TPE |
DB-PSE-230 | ||
Detection method | Pressure-sensitive | Pressure-sensitive | ||
Sensor length | Custom (Max Delivery length 25 m) | 200 mm to 6000 mm | ||
Actuation distance | 5.3 mm | ＜ 3 mm | ||
Actuation force | 63.4 N (USR 10 - Test-Speed 10 mm/s) | ≤ 25 N | ||
Overtravel distance | 13.9 mm (400 N) | ＜ 19 mm | ||
Response time | — | 13 ms | ||
Cross-sectional area | Width: 25 mm, Height: 30 mm | Width: 25 mm, Height: 30 mm (base not included, base height: 14 mm) | ||
Maximum operation angle | 2 × 45° | ＜ 90° | ||
Material | TPE | EPDM | ||
Degree of protection | IP65 | IP65 | ||
Connection | 2.5/5/10 meters PUR LIY11Y 2 × 0.34 mm² | 2 meters VVR Ø 4 mm 2 × 0.35 mm² (Red/black core) | ||
Certifications | TÜV, cURus | TÜV | ||
Mechanical life | — | ＞ 3,000,000 times | ||
Ambient operating temperature | -10°C to 70°C | -20℃ to 55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety edges is a safety part made by DADISICK, not official brand ABB's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DB-PSE series safety edges
DB-PSE Series Satety Edges Dimensions
DB-PSE Series Satety Edges Cross-sectional area
DB-PSE Series Satety Edges's Base dimensions
FAQ
Where are Safety Edges commonly used?
Safety edges are commonly used in: Automatic doors and gates, Industrial machinery, Automated guided vehicles (AGVs), Elevators and lifts, Conveyor systems, Robotics.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
