For Leuze DDLS 200 Optical Data Transmission Replacement | 30 m Operating Range
- Model
- DDLS 200 Series | DDLS 200/30.1-20-W, DDLS 200/30.1-10-W, DDLS 200/30.2-20-W, DDLS 200/30.2-10-W
Item specifics
- Series:
- DDLS 200 Series
- Transmission distance:
- 0.2 ... 30 m
- Data transmission rate:
- 2 Mbit/s
- Supply voltage:
- 18 …30 V DC
- Power consumption:
- Approx. 200mA at 24 V DC (without heating)
Review
Description
For Leuze DDLS 200 Optical Data Transmission Replacement | 30 m Operating Range
| Brand | From network | DADISICK | ||
| Models | DDLS 200/30.1-20-W | DDLS 200/30.2-20-W | ST100-80E3 | |
DDLS 200/30.1-10-W | DDLS 200/30.2-10-W | |||
Dransmission distance | 0.2 ... 30 m | 80 m | ||
Data transmission rate | 2 Mbit/s | 100 Mbit/s | ||
Supply voltage | 18 …30 V DC | DC 10V - 30V | ||
Power consumption | Approx. 200mA at 24 V DC (without heating) Approx. 800 mA at 24 V DC (with heater) | 3 W（max） | ||
Interface | Interbus-S, RS 422; RS 485, PROFIBUS DP | Ethernet, Unlimited | ||
Light source | LED, Infrared | Laser, Calibration light: 650 nm, Communication light source wavelength: E3 785 nm/E4 850nm | ||
Light angle | 3° (Opening angle) | 1° (divergence angle)
1.5° ( receiving angle) | ||
Connection | Connector M12 | Connector M12 | ||
Dimensions | 89.25 x 196.5 x 111.8 mm | 102 × 84 × 140.5 mm | ||
IP rating | IP65 | IP65 | ||
Operating temperature | -5 ... 50 °C (Without heating) -35 ... 50 °C (With heating) | -10℃~55°C (indoor use) | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product Model Display Instructions
The brands and specifications displayed on this page are for reference and product selection purposes only. The optical data transmission devices we provide are manufactured by DADISICK and are not official products of Leuze or any other brand mentioned. DADISICK offers compatible alternatives to official brand products. We do not own the rights to these brands. For genuine Leuze products, please contact the brand's authorized representative directly.
Product Recommendations
Optical Data Transmission Module ST100 Series
FAQ
How to install an optical data transmission sensor?
Ensure that the transmitter and receiver are in a straight line of sight, avoiding obstructions that may affect the optical signal. Adjust the angle and position according to the installation instructions in the manual to ensure proper alignment.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
