For HOKUYO BWF Series Optical Data Transmission Device Replacement | 100 m Operating Range | BWF-12A/BWF-12B
- Model
- BWF Series | BWF-12A/BWF-12B
Item specifics
- Series:
- BWF Series
- Transmission distance:
- MAX. 100 m
- Data transmission rate:
- DC to 9,600bps (But 19.2kbps for RS-232C)
- Supply voltage:
- 10 to 30VDC
- Power consumption:
- 150mA or less (at 12VDC), 80mA or less (at 24VDC)
Review
Description
For HOKUYO BWF Series Optical Data Transmission Device Replacement | 100 m Operating Range | BWF-12A/BWF-12B
| Brand | From network | DADISICK | ||
| Models | BWF-12A/BWF-12B | ST100-120E3 | ||
Dransmission distance | MAX. 100 m | 120 m | ||
Data transmission rate | DC to 9,600bps (But 19.2kbps for RS-232C) | 100 Mbit/s | ||
Supply voltage | 10 to 30VDC | DC 10V - 30V | ||
Power consumption | 150mA or less (at 12VDC), 80mA or less (at 24VDC) | 3 W（max） | ||
Interface | Current loop/RS-232C | Ethernet, Unlimited | ||
Light source | — | Laser, Calibration light: 650 nm, Communication light source wavelength: E3 785 nm/E4 850nm | ||
Light angle | ±2° (Directional angle) | 1° (divergence angle)
1.5° ( receiving angle) | ||
Connection | Connector (25pins D-sub connector), but M3 screw terminal at power source | Connector M12 | ||
Dimensions | 44 x 84 x 130.3mm | 102 × 84 × 140.5 mm | ||
IP rating | IP60 (IEC Standard), available up to IP64 by user's option | IP65 | ||
Operating temperature | -10 to +50℃, 85%RH or less (not icing, not condensing) | -10℃~55°C (indoor use) | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product Model Display Instructions
The brands and specifications displayed on this page are for reference and product selection purposes only. The optical data transmission devices we provide are manufactured by DADISICK and are not official products of HOKUYO or any other brand mentioned. DADISICK offers compatible alternatives to official brand products. We do not own the rights to these brands. For genuine HOKUYO products, please contact the brand's authorized representative directly.
Product Recommendations
Optical Data Transmission Module ST100 Series
FAQ
What should I do if the communication is interrupted?
Check the alignment, power status, and signal strength of the device. If communication cannot be restored, please refer to the troubleshooting section or contact technical support.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
