1 / 5
For IFM O1D Series Photoelectric Distance Sensor Replacement | 75 m Measuring Range
- Model
- O1D Series | O1D106
Item specifics
- Series:
- O1D Series
- Measuring range:
- 1...75 m
- Light spot size:
- 150 mm
- Measurement accuracy:
- ± 63 mm@33 Hz; ± 35 mm@1 Hz
- Resolution:
- —
Review
Description
For IFM O1D Series Photoelectric Distance Sensor Replacement | 75 m Measuring Range
| Brand | From network | DADISICK | ||
| Models | O1D106 | DS-80 | ||
Measuring range | 1...75 m; (Reflector E21159) | MAX. 80 m | ||
Light spot size | 150 mm | 100 mm (@80 m) | ||
Measurement accuracy | ± 63 mm@33 Hz; ± 35 mm@1 Hz | ±2 mm | ||
Repeatability | ± 43 mm@33 Hz; ± 15 mm@1 Hz | 1 mm | ||
Measurement frequency | 1...33 Hz | 1000 Hz | ||
Resolution | — | 0.1 mm | ||
Max. movement speed | — | 15 m/s | ||
Supply voltage | 18...30 V DC | DC 9 V ... 30 V | ||
Current consumption | < 150 mA | 0.2 A at 12 V DC | ||
Laser class | class 2 | Class 2 | ||
Light source | 650 nm, Laser | Red laser (visible light) | ||
Interface | IO-Link communication interface | SSI, Ethernet 100BASE-TX (Data Transmission) | ||
Connection | Connector: 1 x M12; coding: A | M12/4-pin/D-coded female straight (For Network); M12/8-pin/A-coded male straight (For Power/SSI) | ||
Dimensions | 59 x 42 x 52 mm | 123 × 69.5 × 90 mm | ||
IP rating | IP 67 | IP65 | ||
Operating temperature | -10...60°C | -10℃~+55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product Model Display Instructions
The brands and specifications displayed on this page are for reference and product selection purposes only. The Photoelectric distance sensors we provide are manufactured by DADISICK and are not official products of IFM or any other brand mentioned. DADISICK offers compatible alternatives to official brand products. We do not own the rights to these brands. For genuine IFM products, please contact the brand's authorized representative directly.
Product Recommendations
DS Series Long-Distance Laser Rangefinder
FAQ
1. Is a sample device available for testing?
Yes, customers can request a sample device for testing to confirm whether it meets their specific needs.
2. What should I do in case of a fault?
Refer to the troubleshooting guide in the user manual. If the issue persists, please contact the DADISICK technical support team.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
