For Pepperl+Fuchs R1000 Distance Sensor Replacement | 150 m Measuring Range with a Foil Reflector | Version for Low Temperature Applications
- Model
- R1000 Series | OMR150M-R1000-SSI-V1V1B-T
Item specifics
- Series:
- R1000 Series
- Measuring range:
- 0.3 ... 150 m
- Light spot size:
- < 75 cm at 150 m
- Measurement accuracy:
- typ. ± 2.5 mm
- Resolution:
- 0.1 mm , adjustable
Review
Description
For Pepperl+Fuchs R1000 Distance Sensor Replacement | 150 m Measuring Range with a Foil Reflector | Version for Low Temperature Applications
Brand | From network | DADISICK | ||
Models | OMR150M-R1000-SSI-V1V1B-T | DS-200 | ||
Measuring range | 0.3 ... 150 m (Foil reflector 500 mm x 500 mm);
0.3... 75 m (Film reflector 250 mm x 250 mm) | MAX. 200 m | ||
Light spot size | < 75 cm at 150 m | 245 mm (@200 m) | ||
Measurement accuracy | typ. ± 2.5 mm | ±2 mm | ||
Repeatability | < 1 mm | 1 mm | ||
Measurement frequency | 300 kHz (Repetition rate) | 1000 Hz | ||
Resolution | 0.1 mm , adjustable | 0.1 mm | ||
Max. movement speed | 15 m/s | 15 m/s | ||
Supply voltage | 10 ... 30 V DC | DC 9 V ... 30 V | ||
Current consumption | 660 mA (18 V) ... 400 mA (30 V) | 0.2 A at 12 V DC | ||
Laser class | Class 1 | Class 2 | ||
Light source | laser diode, modulated visible red light, 660 nm | Red laser (visible light) | ||
Interface | SSI, RS-422 | SSI, Ethernet 100BASE-TX (Data Transmission) | ||
Connection | 4-pin, M12x1 connector, A-coded (supply) ,
5-pin, M12x1 connector, B-coded (SSI) | M12/4-pin/D-coded female straight (For Network); M12/8-pin/A-coded male straight (For Power/SSI) | ||
Dimensions | 106.6 mm x 55 mm x 80.6 mm | 123 × 69.5 × 90 mm | ||
IP rating | IP67 | IP65 | ||
Operating temperature | -30 ... 60 °C | -10℃~+55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. |
Product Model Display Instructions
The brands and specifications displayed on this page are for reference and product selection purposes only. The Distance Sensors we provide are manufactured by DADISICK and are not official products of Pepperl+Fuchs or any other brand mentioned. DADISICK offers compatible alternatives to official brand products. We do not own the rights to these brands. For genuine Pepperl+Fuchs products, please contact the brand's authorized representative directly.
Product Recommendations

DS Series Long-Distance Laser Rangefinder
FAQ
1. Does the device support multi-angle installation?
Yes, but it is recommended to align the laser beam perpendicularly to the reflector to achieve optimal measurement accuracy.
2. Are special tools or accessories required for installation?
Installation does not require special tools. A standard mounting bracket is included, but higher- precision adjustment devices can be purchased for specific scenarios.
3. What interface protocols does the DS Series support?
The DS Series supports SSI, Ethernet 100BASE-TX, and TCP/IP protocols, making it easy to integrate with industrial control systems.
4. Does it support remote debugging and parameter configuration?
Yes, remote debugging and parameter configuration can be performed via the SimiView software, improving installation and maintenance efficiency.
5. How does the device perform in vibrating environments?
The DS Series features an anti-vibration design and can operate reliably in high-vibration industrial environments. However, prolonged exposure to excessive mechanical shock should be avoided.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.