For Pepperl+Fuchs R1000 Distance Sensor Replacement | 50 m Measuring Range with a Foil Reflector | Version for Low Temperature Applications
- Model
- R1000 Series | OMR50M-R1000-SSI-V1V1B-T
Item specifics
- Series:
- R1000 Series
- Measuring range:
- 0.3 ... 50 m
- Light spot size:
- < 25 cm at 50 m
- Measurement accuracy:
- typ. ± 2.5 mm
- Resolution:
- 0.1 mm , adjustable
Review
Description
For Pepperl+Fuchs R1000 Distance Sensor Replacement | 50 m Measuring Range with a Foil Reflector | Version for Low Temperature Applications
Brand | From network | DADISICK | ||
Models | OMR50M-R1000-SSI-V1V1B-T | DS-80 | ||
Measuring range | 0.3 ... 50 m (Foil reflector 500 mm x 500 mm) | MAX. 80 m | ||
Light spot size | < 25 cm at 50 m | 100 mm (@80 m) | ||
Measurement accuracy | typ. ± 2.5 mm | ±2 mm | ||
Repeatability | < 1 mm | 1 mm | ||
Measurement frequency | 300 kHz (Repetition rate) | 1000 Hz | ||
Resolution | 0.1 mm , adjustable | 0.1 mm | ||
Max. movement speed | 15 m/s | 15 m/s | ||
Supply voltage | 10 ... 30 V DC | DC 9 V ... 30 V | ||
Current consumption | 660 mA (18 V) ... 400 mA (30 V) | 0.2 A at 12 V DC | ||
Laser class | Class 1 | Class 2 | ||
Light source | laser diode, modulated visible red light, 660 nm | Red laser (visible light) | ||
Interface | SSI, RS-422 | SSI, Ethernet 100BASE-TX (Data Transmission) | ||
Connection | 4-pin, M12x1 connector, A-coded (supply) ,
5-pin, M12x1 connector, B-coded (SSI) | M12/4-pin/D-coded female straight (For Network); M12/8-pin/A-coded male straight (For Power/SSI) | ||
Dimensions | 106.6 mm x 55 mm x 80.6 mm | 123 × 69.5 × 90 mm | ||
IP rating | IP67 | IP65 | ||
Operating temperature | -30 ... 60 °C | -10℃~+55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. |
Product Model Display Instructions
The brands and specifications displayed on this page are for reference and product selection purposes only. The Distance Sensors we provide are manufactured by DADISICK and are not official products of Pepperl+Fuchs or any other brand mentioned. DADISICK offers compatible alternatives to official brand products. We do not own the rights to these brands. For genuine Pepperl+Fuchs products, please contact the brand's authorized representative directly.
Product Recommendations

DS Series Long-Distance Laser Rangefinder
FAQ
1. Can the DS Series replace SICK Dx100 or Leuze AMS Series?
The DS Series offers similar functionalities and can serve as a compatible alternative to SICK Dx100, Leuze AMS 100i, and AMS 300i. However, specific parameters and interface requirements must be verified for compatibility.
2. Can it be integrated with PLCs or other industrial control systems?
Yes, the DS Series can seamlessly connect to mainstream PLCs (such as Siemens and Omron) and industrial control systems using standard interface protocols.
3. Does it support MODBUS or PROFINET protocols?
The current version supports Ethernet and SSI protocols. Models supporting MODBUS and PROFINET may be released in the future. Please stay tuned for updates.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.