For Acuity Laser AS1100 Long Distance Sensor Replacement | 150 m Measuring Range with an Acuity Reflective Plate
- Model
- AS1100 Series | AS1100
Item specifics
- Series:
- AS1100 Series
- Measuring range:
- 40 to150 m
- Light spot size:
- 7 x 3 mm; 28 x 13 mm; 55 x 30 mm
- Measurement accuracy:
- ± 3 mm
- Resolution:
- 0.1 mm
Review
Description
For Acuity Laser AS1100 Long Distance Sensor Replacement | 150 m Measuring Range with an Acuity Reflective Plate
| Brand | From network | DADISICK | ||
| Models | AS1100 | DS-200 | ||
Measuring range | 40 to 150 m Measuring Range with an Acuity Reflective Plate | MAX. 200 m | ||
Light spot size | Laser spot diameter @ 10, 50, 100 m 7 x 3 mm; 28 x 13 mm; 55 x 30 mm | 245 mm (@200 m) | ||
Measurement accuracy | ± 3 mm | ±2 mm | ||
Repeatability | 0.7 mm | 1 mm | ||
Measurement frequency | 100 Hz | 1000 Hz | ||
Resolution | 0.1 mm | 0.1 mm | ||
Max. movement speed | — | 15 m/s | ||
Supply voltage | 12 - 30 Volts DC | DC 9 V ... 30 V | ||
Current consumption | Max. Current: 0.2A | 0.2 A at 12 V DC | ||
Laser class | Class 2, Complies with 21 CFR 1040.10 and with Laser Notice 50, IEC/EN60825-1:2014 | Class 2 | ||
Light source | 650 nm, 1 mW visible RED | Red laser (visible light) | ||
Interface | Serial: RS232, RS422, RS485, (USB connection only for configuration), ethernet option available; Analog output: 4-20 mA/0-20mA software configurable | SSI, Ethernet 100BASE-TX (Data Transmission) | ||
Connection | Serial cable with DB9 connector (optional serial to USB cable), AC power supply with 110 VAC or 240 VAC. | M12/4-pin/D-coded female straight (For Network); M12/8-pin/A-coded male straight (For Power/SSI) | ||
Dimensions | — | 123 × 69.5 × 90 mm | ||
IP rating | IP65 | IP65 | ||
Operating temperature | -10 to 50 °C | -10℃~+55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product Model Display Instructions
The brands and specifications displayed on this page are for reference and product selection purposes only. The Laser Distance Sensors we provide are manufactured by DADISICK and are not official products of Acuity Laser or any other brand mentioned. DADISICK offers compatible alternatives to official brand products. We do not own the rights to these brands. For genuine Acuity Laser products, please contact the brand's authorized representative directly.
Product Recommendations
DS Series Long-Distance Laser Rangefinder
FAQ
1. How does the DS Series communicate?
Communication is achieved using the SimiView software, which operates on the TCP/IP protocol.
2. Should network security be a concern?
Yes, users must take measures to prevent malicious network interference to ensure the safe operation of the device.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
