For Acuity Laser AR2700 High-Speed Long Range Sensor Replacement | 270 m Measuring Range with a Retroreflective Target
- Model
- AR2700 Series | AR2700
Item specifics
- Series:
- AR2700 Series
- Measuring range:
- 0.2 to 270 m
- Light spot size:
- 2 mrad x 0.4 mrad divergence
- Measurement accuracy:
- ± 60 mm
- Resolution:
- 1 mm
Review
Description
For Acuity Laser AR2700 High-Speed Long Range Sensor Replacement | 270 m Measuring Range with a Retroreflective Target
| Brand | From network | DADISICK | ||
| Models | AR2700 | DS-200 | ||
Measuring range | 0.2 to 270 m Measuring Range with a Retroreflective Target | MAX. 200 m | ||
Light spot size | 2 mrad x 0.4 mrad divergence | 245 mm (@200 m) | ||
Measurement accuracy | ± 60 mm | ±2 mm | ||
Repeatability | ± 25 mm | 1 mm | ||
Measurement frequency | 40 KHz maximum using binary data output | 1000 Hz | ||
Resolution | 1 mm | 0.1 mm | ||
Max. movement speed | — | 15 m/s | ||
Supply voltage | 10 - 30 Volts DC | DC 9 V ... 30 V | ||
Current consumption | 3W max | 0.2 A at 12 V DC | ||
Laser class | Class 1 eye-safe, Complies with 21 CFR 1040.10 with Laser Notice 50, IEC/EN60825-1:2007 | Class 2 | ||
Light source | 905 nm, infrared | Red laser (visible light) | ||
Interface | Serial: RS232 full duplex, RS422 (option); Analog: 4-20 mA, 2 limit switches (up to 200 mA sourcing) | SSI, Ethernet 100BASE-TX (Data Transmission) | ||
Connection | — | M12/4-pin/D-coded female straight (For Network); M12/8-pin/A-coded male straight (For Power/SSI) | ||
Dimensions | 98 mm x 46 mm x 25 mm | 123 × 69.5 × 90 mm | ||
IP rating | IP67 | IP65 | ||
Operating temperature | -20 to 60°C | -10℃~+55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product Model Display Instructions
The brands and specifications displayed on this page are for reference and product selection purposes only. The Laser Distance Sensors we provide are manufactured by DADISICK and are not official products of Acuity Laser or any other brand mentioned. DADISICK offers compatible alternatives to official brand products. We do not own the rights to these brands. For genuine Acuity Laser products, please contact the brand's authorized representative directly.
Product Recommendations
DS Series Long-Distance Laser Rangefinder
FAQ
1. Can the DS Series replace SICK Dx100 or Leuze AMS Series?
The DS Series offers similar functionalities and can serve as a compatible alternative to SICK Dx100, Leuze AMS 100i, and AMS 300i. However, specific parameters and interface requirements must be verified for compatibility.
2. Can it be integrated with PLCs or other industrial control systems?
Yes, the DS Series can seamlessly connect to mainstream PLCs (such as Siemens and Omron) and industrial control systems using standard interface protocols.
3. Does it support MODBUS or PROFINET protocols?
The current version supports Ethernet and SSI protocols. Models supporting MODBUS and PROFINET may be released in the future. Please stay tuned for updates.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
